What To Do If Your Water Heater All Of A Sudden Stops Working
What To Do If Your Water Heater All Of A Sudden Stops Working
Blog Article
Just how do you feel about Hot Water Heater Repair?
Several modern-day houses use an electric water heater for their furnace, as a result of its comfort as well as ease of use. However, similar to any other electric home appliances, issues may emerge with its use, suddenly. It can be really frustrating to awaken to a chilly shower rather than a warm one or having your bathroom with water that isn't hot enough or perhaps as well hot. Whatever the case may be, water heater issues can be quite aggravating. Thankfully, we have actually made a listing of possible options to your water heater concerns. There are a number of variables that might create a lot of these troubles, it could be a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you shut off the major power supply for safety. Whatever the issue is, getting it dealt with ought to not present way too much of an issue if you comply with these actions:
Check Your Power Supply:
As fundamental as this might seem, it is extremely essential. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water suddenly stops working is to validate that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, simply turn it on and off once more. Replace any damaged or damaged fuse. Examine the appliance with power after these modifications to see if it's currently functioning.
Check the Heating Element in the Water Heater:
If it's not a power issue, after that attempt checking out your heating element if it is still working. Check each of your burner to be sure the problem isn't with any of them. If any of them is malfunctioning, change that component and afterwards check whether the hot water is back on.
Check Your Thermostat:
If your water heater still isn't working or the water appearing isn't hot enough, you might require to examine the temperature settings on your top thermostat. Make certain the breaker is switched off before doing anything. Open the accessibility panel and also press the red button for temperature level reset over the thermostat. This should assist warm the water. Turn the circuit breaker back on as well as examine if the problem has been solved.
Call A Specialist:
If after replacing all faulty parts and resetting your temperature, the water heater still isn't working, you might require to call a specialist plumber for a specialist opinion. The problem with your heater could be that the hot and cold taps have been switched or it may be undersized for the amount of hot water needed in your home. Whatever the case may be, a professional plumber would help solve the problem.
Conclusion
Hot water heater troubles are not constantly significant. Many of them are due to minor problems like a blown fuse or worn-out burner. Changing the malfunctioning components should suffice. Nonetheless, if you are still incapable to address the problem, give a call to your nearest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a serious reader about What Would Cause My Electric Water Heater to Stop Working?, I thought sharing that piece of content was a good thing. Appreciated our content? Please share it. Let another person discover it. Bless you for your time. Kindly come by our blog back soon.
Call
Report this page